Hi Everyone,
Hussena here to share with you a tutorial on how to make a flip-card using your dies and Big Shot..It's a really very easy way to make some fast and interactive cards to get the 'WOW' factor from your friends and family..So first let's gather our supplies and you all will need the following to make these cards below.
Supplies needed for the tutorial :-
Big Shot Machine
Spellbinder's Nestabilities Label 4
Martha Stewart Scoring Board
Fiskars Sure Cut paper Trimmer
Cardstocks
Pattern paper of your choice ( I have used the Prima Zephyr Paper Pad.)
Distress inks(Totally optional)
And now for the tutorial :-
I have written the steps in the pictures itself..I hope this makes it easier for you all to understand it.
Step 1- Take a piece of cardstock measuring 7 1/2 inches by 4 1/4 inches.
Step 2 - Fold it in a zig-zag pattern.
Hussena here to share with you a tutorial on how to make a flip-card using your dies and Big Shot..It's a really very easy way to make some fast and interactive cards to get the 'WOW' factor from your friends and family..So first let's gather our supplies and you all will need the following to make these cards below.
Supplies needed for the tutorial :-
Big Shot Machine
Spellbinder's Nestabilities Label 4
Martha Stewart Scoring Board
Fiskars Sure Cut paper Trimmer
Cardstocks
Pattern paper of your choice ( I have used the Prima Zephyr Paper Pad.)
Distress inks(Totally optional)
And now for the tutorial :-
I have written the steps in the pictures itself..I hope this makes it easier for you all to understand it.
Step 1- Take a piece of cardstock measuring 7 1/2 inches by 4 1/4 inches.
Step 2 - Fold it in a zig-zag pattern.
Step 3 - Your card should look like this now.
Step 4 - Now measure,cut and glue your pattern paper on to the front of your card.
Step 5 -Now place your die on the smaller side of the card with it's centre point aligning with the 2 3/4 inch scored line and stick it with either a Washi Tape or any repositionable glue.
Step 6 -Now make your cutting sandwich for this you can refer our DT member Mallika's post on how to create a cutting sandwich for your dies...Place your acrylic plate only up to the 2 3/4 inch score line and run it through your Big Shot..This will allow you to only partially die-cut one end of your card which is required for the flipping mechanism.
Step 7 -Now that you have cut one end ...Turn your card around and place your acrylic plate on the 3 3/4 inch score line and again partially die-cut it...Please take care to place your acrylic plates to the the required scored line...otherwise you will end up cutting up the entire piece.
Step 8 -After you have die-cut both the ends,your card will look like this below....Now, peel off the pattern paper from the die-cut ends...Don't worry if you mess up a bit..This will later on get covered up.
Step 9 -Now using the same label die, die-cut two pieces of cardstock....One plain and other colored....The plain one will be attached to the back side where as the colored one will be in the front of your card.
Step 10 -Attach the white cardstock on the front side and when you flip your card this will go on the back.
Step 11- Attach the colored cardstock on the back side as shown.
Step 12 -Once both the die-cuts are attached, this is how your card will look.
Step 13 -As you can see,when the card is opened, the white die-cut piece comes in the front where you can write your message.
Step 14 -Once the card is closed, this is how it will look.
Step 15 -Here are my sample cards before I have embellished them.
Supplies used for embellishing :-
Lawn Fawn Blissful Botanicals and Flutter By.
Distress ink : Tumbled Glass., Versafine Onyx Black Ink.
Hope you all like my tutorial..If you have any queries do leave me a comment below and I will try to get back to you as soon as possible!..
And don't forget to participate in our current challenge 'Summer Sundae' to win some lovely prizes
www.crafterscorner.in(All Craft supplies under One roof)
For further information please contact us at : info@crafterscorner.in
it is so beautiful hussena and thanks for sharing the tutorial
ReplyDeleteGorgeous card and colors! Thanks for the tutorial :)
ReplyDeletesuperb tutorial Hussena...loved to so much !!
ReplyDeletev beautiful !! thanks for d tute !!
ReplyDeleteSweet tutorial.. Thanks Hussena.. :)
ReplyDeleteNever seen such gorgeous flip-card Hussena ! Thanks a lot for sharing the steps .
ReplyDeleteCards looks stunning Hussena, the colors, flowers , everything looks beautiful.
ReplyDeleteoh this is such a cute idea Hussena!
ReplyDeleteWow ...superb tute and card and loved the colors you chose.I will definitely try this one .It has been on my list for a very long time now.I love the die you chose too
ReplyDeletenice tute, thanks hussena
ReplyDeletelovely cards, and good tutorial !!!!
ReplyDeletePaula
Great tutorial Hussena.Love the cards.I think I am going to try this out.
ReplyDeletevery nice tute and love colours you used.thanks.
ReplyDeleteWonderful post!! You make it look so easy!!
ReplyDeleteawesome tutorial
ReplyDeleteNice tute, Hussena...Lovely card!!
ReplyDeleteThats a beautiful card,the papers look gorgeous, TFS the technique !
ReplyDeletebeautiful card hussena. like your tutorial. so share some more such tips
ReplyDeleteVERY BEAUTIFUL CARDS and thanx for the tute,this is useful even for people like me who do not possess any dies or machines!!
ReplyDeletehttp://www.kalasirjana.blogspot.in/
thank you for the step by step instructions, I'm making an Easter card using your tutorial, my blog is:
ReplyDeletehttp://www.CreatedBySunshineHoneyBee.blogspot.com
Melissa
"Sunshine HoneyBee"
I'm watching this tutorial here in Ireland and. It has explained the technique brilliantly. You have made it look so easy and you're finished cards turned out beautifully. Thank you so much for a tutorial that makes 'flip cards' so do-able. Great tutorial Hussena, many thanks.
ReplyDeleteWonderful thank you so much for sharing,
ReplyDeleteAnn
Thank you so much for this tutorial :) I can see your score lines and everything is clear and easy to understand. Thank you!
ReplyDeleteThats so brilliant thank you for that x
ReplyDeleteThank you so much for the tutorial. It is very clear and so very helpful. A. Young
ReplyDeleteThank you for sharing this, I've been wanting to make one of these for a while and your instructions are explained so clearly - will definitely have a go now. Kay
ReplyDeleteMany thanks for such a great tutorial. You explained it so well, and it really helps to have the writing on each slide explained so good. This is just what I needed to help me understand the steps.
ReplyDeleteYour card is beautiful! Thank you for taking the time to share this tutorial with us.
ReplyDeleteThanks for sharing, so pretty!
ReplyDeleteI loved this tutorial Hussena and couldn't wait to have a play! Thanks so much for sharing.
ReplyDeleteI get it! Such great directions. I have never been able to fully visualize and accomplish the partial die cut. Now I do. Thank you. It's 2016 so it took me awhile...
ReplyDeleteJust found this tutorial, how kind of you to take so much care with the instructions to help us all. Thank you, Cx
ReplyDeleteFantastic tutorial ,I've been trying all day to cut out a circle card like this (which I know is a bit more difficult as you have no central marker!), I couldn't understand how or why I was getting it wrong, but thanks to your excellent instructions I now know how to do it. I can now finish my father's day card ,just in time! Thanks again Lou (UK)
ReplyDeleteBeautiful card with excellent instructions . Must try this , thanks for sharing
ReplyDelete