![]() |
In the last 2 DT posts I showed you various ways to use labels/ nesting dies . Here are the links in case you missed them : Stretching your Dies and Going 3 D with Die
I got this beautiful ,beautiful Spellbinders Floral Gazebo die from Crafters Corner for my DT post and since it is such a gorgeous intricately designed die I thought I will show you some tips to die cut such intricate designs.
And before I do that let me give you some tips on buying dies
![]() |
![]() |
- Google up the name of the die and see if the project photos appeal to you .
- See if you are getting value for money...Count the number of dies in a set and also check out the size of the dies as well as the individual die designs. for eg in this Floral Gazebo die set...you get 7 dies which includes 3 styles of leafy vines , a flower, a cute bird and a very versatile heart in addition to the main gazebo!
- If you are confused which brand die to get....I would advise you to opt for the more reputed brand even if it is more expensive unless you have read / heard rave reviews of the "cheaper/newer" brand! Some years back I got a circle die set from a brand which I will not name and was so frustrated that it wouldn't give clean cuts! And yes mailing them didn't change the situation. Later I bought a more expensive circle die set from a reputed established brand and boy do I love the clean easy cuts it gives!
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Factors which determine how easily and crisply you can cut intricate dies
How old your Big Shot is
How bent your Cutting pads are
The brand of your die
The thickness of your paper
The Intricacy of the die design
How to Cut Intricate Dies1. Use the Metal Adapter Plate
![]() |
Add the metal plate adapter under your cutting plates and proceed with the usual die cutting sandwich.
![]() |
2. Keeping your die cutting surface up
This is especially important for intricate designs. In case you have to see where you are cutting...in the first round use the die cut surface down but in the event you get a partial cut ...flip it and run it though your machine with the cutting surface up
In the picture above the area in the lower part is still not cleanly cut even after the use of the metal plate...in this case just rotate the die and pass it again through your machine
3. Give 2 passes Rotating at 90 degrees
This will give a lovely clean cut unless you have a really naughty die with a super delicate design!
Releasing your Die cut
Releasing die cuts from the die or releasing the tiny die cut pieces from the main die cut can be time consuming.
This is especially important for intricate designs. In case you have to see where you are cutting...in the first round use the die cut surface down but in the event you get a partial cut ...flip it and run it though your machine with the cutting surface up
![]() |
3. Give 2 passes Rotating at 90 degrees
![]() |
![]() |
![]() |
You can use the popular Spellbinders tool n one which Shalini tells me is an awesome tool and good investment as it has a brush end to clean your die and a needle end and spatula to help release the die cuts.
If you want a cheaper alternative....use nice fat pins like the corsage pins shown above which by the way are also available at Crafters Corner at this link :
Corsage Pins and a foam pad.
![]() |
You can poke the die cuts while the die is still in the die or peel the die cut off and poke out the pieces.
I find that using the foam pad gives a nice support to the die cut and makes poking out the tiny pieces quicker and easier.
Releasing Stubborn die-cuts from the Die
Suppose you have a really stubborn die cut sticking to your die and it irritates you big time...there are a couple of things you can do..
![]() |
Releasing Stubborn die-cuts from the Die
![]() |
1. Try the conventional poking with needle
2. Try with needle and brush part of the Spellbinders tool n one
3. Use die release paper or wax paper between your die and paper the next time you die cut
Picking up tiny Die cut Pieces
If you want to try techniques such as inlaid die cutting or you have some really tiny die cuts or negatives of die cuts you want to use...picking up these tiny pieces can be tricky. Some of the tools which can make your job easier are
Picking up tiny Die cut Pieces
![]() |
1. Reverse tweezers.....my fav for flower making and embossing...not so much for tiny piece picking after I got the Tanto and Crystal Katana
2.Silhouette's pick me up tool
3. The best pick up tools...as reviewed in this post : Crystal Katana and the Tanto
Sticking Intricate/ Delicate Die cuts
Sticking those delicate die cut pieces can be so tricky
3. The best pick up tools...as reviewed in this post : Crystal Katana and the Tanto
Sticking Intricate/ Delicate Die cuts
![]() |
Here are some options
1. Spray adhesive reviewed here :http://crafterscornerindia.blogspot.in/2015/04/spray-adhesive-review.html
2. Fine nozzle glue which is quite tacky such as the Tombow
3.Glue Pens
4.Thin double sided foam tape or tacky tape
I hope you find these tips helpful.
Shoot any die cutting queries you may have in the comments and I or any of the experienced DT or Shalini will try to help you!
List of other Supplies
Dies : Cheery Lynn Flourish 13 , Cheery Lynn Build A Flower Embellishments 3 , Marianne Anja Border , Heartfelt creations Sun kissed fleur ,
List of other Supplies
Dies : Cheery Lynn Flourish 13 , Cheery Lynn Build A Flower Embellishments 3 , Marianne Anja Border , Heartfelt creations Sun kissed fleur ,
Papers: Bob n Betty




























