Happy Snowman on a Frosty Morning...Picture Heavy Tutorial Post !

Hi Friends,
This is Riti Banka Poddar here today, Saying Hello.
It's such a wonderful time with the change in the weather...with cool evenings & sunny mornings. It's Time to get all those fancy warm clothes out along with our favourite. blankets to snuggle in & stay warm!!

For my Tute, I wanted to welcome the Winters, hence I made this Happy Snowman on a Frosty Morning - Slider Pop Up card !

so let's begin the Pictorial for this awesome Slider Pop Up Card !
It's a PICTURE HEAVY POST....so please sit back with hot Coffee/Hot Chocolate & some of your fav. cookies to enjoy the Tute !!

Before I begin the Tute, here's a picture of the complete Card !
Click on the pictures for a larger picture.

Okay let's begin with the Tutoial "

Firstly gather your Card stock in the sizes shown in the picture below.

(note : The card stock should be sturdy enough to be in an upright position)

Next : Emboss the 5 3/8"x4" card stock using your embossing Folder.

Use your Distress Paint Daubers to give a Distressed Look to the embossed Card Stock.

Score at 1 1/2" from one end. This will be the base of the POP-UP !

Score the 2 1.2" x 1 1/2" Piece at 1/2"

This is the Front Pop Up Piece. (sorry about the blurry picture)

Next score the 2 3/4"x 1" piece at  1/2" and 2 /4"

This is the Back Pop Mechanism Piece.

Now score the 1 1/2" x 1/2" piece at 1/2" and 1"

This is the Back Pop Up mechanism Piece.

Our next step will be to decorate our Wrap Up Piece.

Take your 1 1/2" x 9" piece and Stamp on it.

(You can also take a Pattern Paper if you like)

But make sure the paper is a thin one, so that the card can slide easily.

Next apply a strong Glue to the Bottom of the Embossed piece.

Do not go above the score line.

Now line up the Long stamped Piece to the Base of the 

embossed Piece along the scored line. 

Lay the base flat on the work surface & lift up the Upper

Part of the embossed piece as shown above.

Now take the Front Pop Up piece, and apply glue on 

one end till the score line.

Stick the Base of this Pop Up piece to the fold of the 

embossed piece's centre.

Next take your 1 1/2" x 1/2" piece which is scored at 1/2" and 1".

Apply glue to the ends. This is the Front Pop Up

Mechanism Piece.

Attach this small mechanism piece to the previous

 piece at the top scored line, as shown above.

Stick the other end to the embossed Piece directly.

It should look like this.

Your card will be upright as shown above.

The front Pop Up piece is Ready !!

Next, take the Base piece and line it up under the embossed piece. 

It should form a uniform frame all around. DO NOT STICK THE BASE TO THE EMBOSSED PIECE. Make sure the base of the card & the Band Piece is lined up properly.

You can press it down as well to keep it flat.

Next step is to make the band.

For that you will need to adhere one end of the stamped 

strip to the other end. Just make sure the band is not 

too tight, as it will make the paper buckle up.

It should be nice & Snug enough to keep the paper in an 

upright position else if too loose it will slide back in a

 flat position.

The band should look like this at the back.

Next you will need to take off the white base piece from the band.

Now using your 1" circle punch, punch out a semi circle 

in the centre through all the layers. This will form

the notch to pull the base piece. 

In case you want a sentiment/greeting make sure

that you write/stamp an inch above the base..so that

it doesn't show through the punched area.

Once you have punched out the base, Slide back the white 

base card back into the band from behind.

It should look like this now.

Pull the card & bring it into an upright position.

Now take the last piece which is 2 3/4" x 1". Sharpen the crease

at 1/2" and 2 1/4" and glue at the scored edge on opposite sides.

Measure an inch down from the centre of the base top as shown above & stick one end of the pop up piece at the white base.

Now bring back the embossed piece to the white base. 

It will get stuck to the already glued pop up piece at the white base.

Next hold the card at the two sides of the band & pull the 

white tab which peeks through the punched area..

and Voila!! You have a Sliding Pop Up Card there.

It's ready to be embellished with all your favourite dies, stamped images,

embellishments etc....

here are some more pics of the card that I made.........

It's easy to go in the mail as well...just if you want to send these to your Friends & Family who live far away from you. The recipients can also display them in their craft room or living rooms in the Popped Up Position... This will surely make their occasion a very special one !!

Well by now I'm sure you all would want the List of the supplies that I used to make this cutie..isn't it??  Here's the list of supplies :

Card Stock : Recollections & Elle Erre by Fabriano

Silver Mirror Paper : for the Snowman's Hat 

Cricut Expression Machine : (for all the die cutting)

Christmas Cheer : Cartridge

Resin Piece - Wreath from Crafter's Corner

Stickles by Ranger : Diamond

                                Orange Peel

                               Eucalyptus

Distress Markers : Shabby Shutters

                        Vintage Photo

                       Walnut Stain

Watercolor Pencils : Faber Castelle

Glaze Gelly Roll Pen by Sakura

Memento Ink : Summer Sky

                       Tuxedo Black

Archival Ink by Ranger - Jet Black

Distress Ink - Tumbled Glass

                 Stormy Sky

                Black Soot

Tombow Mono Multi Liquid Glue

Inkadinkado stamp : Christmas Characters

Hero Arts : Cling Canvas Stripes Stamp

Distress Paint : Chipped Sapphire

                  Broken China

Cuttlebug Embossing Folder : Snowflakes

Martha Stewart : Scor Board

Fiskars : SureCut Deluxe Craft Paper Trimmer (12")

1" Circle Punch by Ek Success

I hope you all have enjoyed my tutorial !!

I had a wonderful time bringing this together for all my crafty friends here.

Cheers!! to winters & the Festive times ahead !

Warm Hugs to All,

Riti